Resetting the Flexs Q3 to Default Settings

To reset the Flexs Q3 device to default settings please follow the steps below..

1.  Unplug the Flexs Q3 Device
2.  Plug in the Flexs Q3 Device, as soon as the power light comes on, unplug it very briefly and plug it back in again, the power light should be flashing quickly to indicate that the device is in DFU mode.
3. . Connect a jumper across the reset pins and leave it on until the power light cycles (approx. 10 seconds)
4.  Power cycle the board once more to exit DFU mode, your device is now running default settings

Default Settings

• IP: 192.168.1.10
• Gateway: 192.168.1.1
• Sub: 255.255.255.0